How to Control Humidity within a Climate Simulator Biosphere CELSS-Video
Controlling Humidity within a Climate Simulator, Biosphere or CELSS is simple and easy to do. Watch this video to see how. Comparison between this BioSphere and NASA’s CELSS, click here General descirotion of the BioSphere/CELSS project, click here
Controlling light in a Biosphere, CELSS or Climate Control System with LEDs – Video
Controlling light in a Biosphere, CELSS or Climate Control System with LEDs – Video. Using LED lighting as the main light source for a BioSphere/CELSS. The LED lamps produce enough heat to heat and cool the whole BioSphere/CELSS. Cooling is the number one problem with Biospheres; not heating. Comparison between this BioSphere and NASA’s CELSS, [...]
Climate Simulator Data Collector Memory Map – Saving Climate Profiles in EEPROM
Climate Simulator Data Collector Memory Map - The memory map is for the remote data collector profile and for the Climate Simulator. The Climate Data Collector is housed in a bird house to prevent people from steeling it or shooting at it with a gun out of total bordom. For more information on the Remote Data [...]
Making An RS232 Network for The Climate Simulator – Protocol
Making an RS232 Network for Climate Simulator – Protocol is simple and easy to program for the PIC18F46K22 and PIC18F4550. This subject is way past gardening, but is more in line with information gathering for the Echo-Climate Simulator. The point behind this sort of network is to create an environment where a watchdog checks all [...]
Heating And Cooling A Climate Simulator or EcoSphere
Heating And Cooling A Climate Simulator or EcoSphere is not as simple as it may seem. The main flaw organizations have made with ecospheres is they make their buildings/systems like a glass house (greenhouse). The main issue each glass houses are heat retention and no cooling. Glass houses act like a lens focusing sunlight into the [...]
How to set up Ecological Characterizations Equipment for Carbon Dioxide, Oxygen, Methane and Ozone Measurements
Ecological Characterizations Equipment for Carbon Dioxide, Oxygen, Methane and Ozone Measurements needs to be done in a perfectly clean and hermetically sealed tank. Before checking anything, the equipment needs to be correctly set up. There are two parts to this. The first part is to set up the equipment and the second is to run [...]
Climate Simulator Data Collector Architecture
The Climate Simulator Data Collector Architecture contains a collection of atmospheric and aquatic sensors used to create feedback how an ecological system is balanced. These sensor monitor the quality of air, water and soil. For a climate simulator to function, it needs to collect data from the following cycles: Cycle Name: Where it exists: Comments: Methane/Soil/Ozone [...]